Radiator flush cost can be decreased now a days. In older days, it was mandatory to remove radiator from engine room for servicing. In addition this requires a mechanic. Now, radiator flush are available in market. You can perform this at home without any difficulty.

Table of Contents

A radiator is a part of the cooling arrangement of an engine. It circulates a mixture of antifreezing agent and water to the engine. This mixture (coolant) absorbs heat of the engine and pumped to radiator. It passes through thin metal fins of radiator and release the absorbed heat.

Radiator Flush

Perfect working of engine cooling system is only possible when radiator is in flawless condition. It must have clean and clear fins. Moreover, no rust or any other blocking particles / debris should be removed during regular services.

Radiator Service Charges

Minimum radiator service charges are around 50 USD. It may rise upto 90 dollars depending on your car make, model and variant.

Radiator Repalcement Cost

If you don’t care about regualr maintenace, radiator can be damaged and replacement become mandatory. It can costs upto about 300 USD to 800 USD.

What is a Radiator Flush?

It is an instant cleaning process which removes rust, dirt, and sludge from vehicle’s cooling arrangement. In addition, it inspects several parts for indications of turn down.

Furthermore, used coolant material is evacuated and replaced with fresh coolant. It valuably service vehicle’s engine cooling system.

Must Read: The Ultimate Car Wash Problems To Watch Out For

Steps to Perform a Radiator Flush

Place drip tary in position. It must be directly under the drain valve.
Remove the radiator cap.
Un-plug drain pipe from radiator and start draining of old coolant. Drain as much coolant as you can. **Note: Don’t put coolant to wash basins or house drains because it is hazardous. Take this to nearby recycling centre so that it can be safely disposed off.**
Plug-in the drain pipe and close the valve.
Pour radiator flush (cleaner) to the radiator and reservoir bottle. Fill the radiator with water upto max level.
Switch On the engine, and let it attain the standard operating temperature.
You may notice drop in water level below minimum level. Switch off the engine let it cool down and top up water upto max level.
Start again the engine, after 10 to 15 minutes turn off it. Let it cool down.
Open drain valve and flush all the cleaning liquid.
Put tap water through radiator mouth and drain through drain valve. Notice until clear water comes out from drain valve.
Connect drain pipe to radiator, tight it with a clip.
Pour new coolant in volume recommended by manufacturer. In addition, fill up reservoir bottle upto max level.
For peace of mind check the level of coolant after a drive of 40 to 50 km. If a little bit low level, fill it properly.

Sales value of vehicle radiators and their parts in the United Kingdom (UK) from 2010 to 2018

Have a look at he the sales value of radiators. You can see reduced sales. One reason may be people now clean / flush radiators by themselves and regularly. It enhances lifespan of radiator and ultimately engine.

Radiator Flush Cost

World’s top rated radiator flush cost you about 15 to 20 USD per pack. It is much less than conventional way of servicing radiator. You can easily do it yourself (DIY).

We have discussed above that normal service charges for radiator are minimum 50 USD. It may go up even upto 100 USD.

You can save your radiator replacement cost if you follow our above given instructions and perform regualar flushing. You can increase the lifespan of